admin / 16.03.2018
Every computer on the Internet is assigned a different IP address. In simple terms, this is a unique identifier by which the data is exchanged on the Internet.
IP addresses — it’s like postal addresses in the city. Postman quickly and accurately deliver the parcel due to the correct address.
Normally, the IP address is as follows 22.214.171.124
But there are times when you need to hide IP address of computer in the Internet. Let’s look at this in more detail.
IP address — this is the exact address of your place of residence. Your ISP can tell exactly what the client at this time using this IP address.
ISP knows all the websites you have visited.
With the ability to hide IP address opens full Internet world.
There are several technologies that enable it to do so.
We look at the most common ones.
The easiest and most reliable way is to use free VPN service Chameleon.
Chameleon uses L2TP VPN via IPSec which provides high speed, hide IP address and encrypt all traffic.
This technology is, by default, implemented across all operating systems. Therefore easy to create a connection in Windows, Mac OS X, iOS, Android, Windows Phone.
Connection configuring within 1 minute
It’s enough to register on the web-site at the link above.
Fill in the form below: Login, Password and E-mail.
After registration need to go to page How to use.
On this page there are instructions on how to connect to a VPN network.
Hide your IP address for free via VPN easily on any OS.
The page displays a list of available VPN connections. Login and Password for the connection must use the same that was provided during registration.
Once connected, you can check IP address.
Your IP address will be changed and you will be anonymous on the Internet.
We will answer all your questions and help you with the choice of connection.
If a connection error occurs, we will help to eliminate them.
Also advise on security issues on the Internet. We will find you the best solution to hide your IP address.
For an introduction to our services, read Review VPN service Chameleon.
Proxy used only for changing the IP address. Thus, your ISP will know that you have used proxies.
Proxies are several types and are divided into anonymity on:
The main types of proxy by connection type:
Chameleon recommends using Socks or elite HTTP proxy.
Proxies can be found for free on the Internet.
But the disadvantage is that such a proxy connection speed is very low and the web-site can be downloaded more than 1 minute.
To use a proxy in the browser to hide the IP address from ISP you need to go to Settings -> Advanced -> Network.
And click on the "Settings" button.
We already know how to look proxy is the IP address and port.
For example: 126.96.36.199 on port 80.
Enter the proxy details in the appropriate field. Sometimes the proxy requires authentication. When you first load the web site will appear with a login and password proxy if you have a proxy of this type.
This method is quite simple but requires the installation of additional software.
Because of this, the use of this method is not always possible, for example, on working computer.
TOR is a network of routers around the world. When using TOR your every request goes through 3 server of TOR network. In this case, at one stage, all traffic encrypted.
Of course the connection speed is quite slow, as traffic passes random 3 web servers which may be located in different parts of the world.
To configure the connection you need to download the browser TOR or a special program to pass all traffic through the network TOR.
Speed TOR network is very slow.
Read more about TOR project.
Connecting to the network TOR free and thus this method to hide IP address gained its popularity.
предыдущая глава | содержание | следующая глава
Plink is a command-line connection tool similar to UNIX . It is mostly used for automated operations, such as making CVS access a repository on a remote server.
Plink is probably not what you want if you want to run an interactive session in a console window.
Plink is a command line application. This means that you cannot just double-click on its icon to run it and instead you have to bring up a console window. In Windows 95, 98, and ME, this is called an «MS-DOS Prompt», and in Windows NT, 2000, and XP, it is called a «Command Prompt». It should be available from the Programs section of your Start Menu.
In order to use Plink, the file will need either to be on your or in your current directory. To add the directory containing Plink to your environment variable, type into the console window:
This will only work for the lifetime of that particular console window. To set your more permanently on Windows NT, 2000, and XP, use the Environment tab of the System Control Panel. On Windows 95, 98, and ME, you will need to edit your to include a command like the one above.
This section describes the basics of how to use Plink for interactive logins and for automated processes.
Once you’ve got a console window to type into, you can just type on its own to bring up a usage message. This tells you the version of Plink you’re using, and gives you a brief summary of how to use Plink:
Z:\sysosd>plink Plink: command-line connection utility Release 0.67 Usage: plink [options] [user@]host [command] («host» can also be a PuTTY saved session name) Options: -V print version information and exit -pgpfp print PGP key fingerprints and exit -v show verbose messages -load sessname Load settings from saved session -ssh -telnet -rlogin -raw -serial force use of a particular protocol -P port connect to specified port -l user connect with specified username -batch disable all interactive prompts -sercfg configuration-string (e.g. 19200,8,n,1,X) Specify the serial configuration (serial only) The following options only apply to SSH connections: -pw passw login with specified password -D [listen-IP:]listen-port Dynamic SOCKS-based port forwarding -L [listen-IP:]listen-port:host:port Forward local port to remote address -R [listen-IP:]listen-port:host:port Forward remote port to local address -X -x enable / disable X11 forwarding -A -a enable / disable agent forwarding -t -T enable / disable pty allocation -1 -2 force use of particular protocol version -4 -6 force use of IPv4 or IPv6 -C enable compression -i key private key file for user authentication -noagent disable use of Pageant -agent enable use of Pageant -hostkey aa:bb:cc:… manually specify a host key (may be repeated) -m file read remote command(s) from file -s remote command is an SSH subsystem (SSH-2 only) -N don’t start a shell/command (SSH-2 only) -nc host:port open tunnel in place of session (SSH-2 only) -shareexists test whether a connection-sharing upstream exists
Once this works, you are ready to use Plink.
To make a simple interactive connection to a remote server, just type and then the host name:
Z:\sysosd>plink login.example.com Debian GNU/Linux 2.2 flunky.example.com flunky login:
You should then be able to log in as normal and run a session. The output sent by the server will be written straight to your command prompt window, which will most likely not interpret terminal control codes in the way the server expects it to. So if you run any full-screen applications, for example, you can expect to see strange characters appearing in your window. Interactive connections like this are not the main point of Plink.
In order to connect with a different protocol, you can give the command line options , , or . To make an SSH connection, for example:
Z:\sysosd>plink -ssh login.example.com login as:
If you have already set up a PuTTY saved session, then instead of supplying a host name, you can give the saved session name. This allows you to use public-key authentication, specify a user name, and use most of the other features of PuTTY:
Z:\sysosd>plink my-ssh-session Sent username «fred» Authenticating with public key «fred@winbox» Last login: Thu Dec 6 19:25:33 2001 from :0.0 fred@flunky:~$
(You can also use the command-line option to load a saved session; see section 188.8.131.52. If you use , the saved session exists, and it specifies a hostname, you cannot also specify a or argument — it will be treated as part of the remote command.)
More typically Plink is used with the SSH protocol, to enable you to talk directly to a program running on the server.
To do this you have to ensure Plink is using the SSH protocol. You can do this in several ways:
Usually Plink is not invoked directly by a user, but run automatically by another process. Therefore you typically do not want Plink to prompt you for a user name or a password.
Next, you are likely to need to avoid the various interactive prompts Plink can produce. You might be prompted to verify the host key of the server you’re connecting to, to enter a user name, or to enter a password.
To avoid being prompted for the server host key when using Plink for an automated connection, you should first make a manual connection (using either of PuTTY or Plink) to the same server, verify the host key (see section 2.2 for more information), and select Yes to add the host key to the Registry. After that, Plink commands connecting to that server should not give a host key prompt unless the host key changes.
To avoid being prompted for a user name, you can:
To avoid being prompted for a password, you should almost certainly set up public-key authentication. (See chapter 8 for a general introduction to public-key authentication.) Again, you can do this in two ways:
Once you have done all this, you should be able to run a remote command on the SSH server machine and have it execute automatically with no prompting:
Z:\sysosd>plink login.example.com -l fred echo hello, world hello, world Z:\sysosd>
Or, if you have set up a saved session with all the connection details:
Z:\sysosd>plink mysession echo hello, world hello, world Z:\sysosd>
Then you can set up other programs to run this Plink command and talk to it as if it were a process on the server machine.
Plink accepts all the general command line options supported by the PuTTY tools. See section 3.8.3 for a description of these options.
Plink also supports some of its own options. The following sections describe Plink’s specific command-line options.
If you use the option, Plink will never give an interactive prompt while establishing the connection. If the server’s host key is invalid, for example (see section 2.2), then the connection will simply be abandoned instead of asking you what to do next.
This may help Plink’s behaviour when it is used in automated scripts: using , if something goes wrong at connection time, the batch job will fail rather than hang.
If you specify the option, Plink passes the specified command as the name of an SSH «subsystem» rather than an ordinary command line.
(This option is only meaningful with the SSH-2 protocol.)
Once you have set up Plink to be able to log in to a remote server without any interactive prompting (see section 7.2.2), you can use it for lots of scripting and batch purposes. For example, to start a backup on a remote machine, you might use a command like:
plink root@myserver /etc/backups/do-backup.sh
Or perhaps you want to fetch all system log lines relating to a particular web area:
plink mysession grep /~fred/ /var/log/httpd/access.log > fredlog
Any non-interactive command you could usefully run on the server command line, you can run in a batch file using Plink in this way.
To use Plink with CVS, you need to set the environment variable to point to Plink:
You also need to arrange to be able to connect to a remote host without any interactive prompts, as described in section 7.2.2.
You should then be able to run CVS as follows:
cvs -d :ext:user@sessionname:/path/to/repository co module
If you specified a username in your saved session, you don’t even need to specify the «user» part of this, and you can just say:
cvs -d :ext:sessionname:/path/to/repository co module
Plink can also be used with WinCVS. Firstly, arrange for Plink to be able to connect to a remote host non-interactively, as described in section 7.2.2.
Then, in WinCVS, bring up the «Preferences» dialogue box from the Admin menu, and switch to the «Ports» tab. Tick the box there labelled «Check for an alternate name» and in the text entry field to the right enter the full path to . Select «OK» on the «Preferences» dialogue box.
Next, select «Command Line» from the WinCVS «Admin» menu, and type a CVS command as in section 7.4, for example:
cvs -d :ext:user@hostname:/path/to/repository co module
or (if you’re using a saved session):
cvs -d :ext:user@sessionname:/path/to/repository co module
Select the folder you want to check out to with the «Change Folder» button, and click «OK» to check out your module. Once you’ve got modules checked out, WinCVS will happily invoke plink from the GUI for CVS operations.
© 2009–2018, PuTTY.ORG.RU — При использовании материалов сайта желательно указывать источник. Спасибо!
Али́ша Бет Мур (англ. Alecia Beth Moore, 8 сентября 1979, Абингтон, Пенсильвания, США), более известна под псевдонимом Пинк (англ.
Макс Карл Эрнст Людвиг Планк (нем.
Max Karl Ernst Ludwig Planck; 23 апреля 1858, Киль — 4 октября 1947, Гёттинген) — немецкий физик-теоретик, основоположник квантовой физики.
Кароли́на Пли́шкова (чеш. Karolína Plíšková; родилась 21 марта 1992 года в Лоуни, Чехословакия) — чешская профессиональная теннисистка, бывшая первая ракетка мира в одиночном разряде; финалистка одного турнира Большого шлема в одиночном разряде (Открытый чемпионат США-2016); победительница 15 турниров WTA (из них 10 в одиночном разряде); двукратная обладательница Кубка Федерации (2015, 2016) в составе национальной сборной Чехии; победительница одного юниорского турнира Большого шлема в одиночном разряде (Открытый чемпионат Австралии-2010).
Пли́ний Ста́рший (лат. Plinius Maior, настоящее имя Гай Плиний Секунд, лат. Gaius Plinius Secundus; между 22 и 24 годами н.
Планковская длина (обозначаемая
Кристина Плишкова (чеш. Kristyna Pliskova; родилась 21 марта 1992 года в Лоуни, Чехословакия) — чешская теннисистка; победительница четырёх турниров WTA (из них один в одиночном разряде); победительница одного юниорского турнира Большого шлема в одиночном разряде (Уимблдон-2010); бывшая четвёртая ракетка мира в юниорском рейтинге.
FILED UNDER : IT
Submit a Comment